logo
produits
EINZELHEITEN ZU DEN PRODUKTEN
Haus > Produits >
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump

Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump

MOQ: 1
Preis: negotiable
Standardverpackung: Standard-Export-Plywood-Gehäuse oder -karton
Lieferfrist: 5-8 Wochen
Zahlungsmethode: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Lieferkapazität: Spitzensaison: 1-3 Monate, Nebensaison: 1 Monat
Ausführliche Information
Markenname
Grundfos
Modellnummer
SP 30-26 N
Flüssigkeiten, die befördert werden sollen:
Wasser
Temperaturbereich der Flüssigkeit:
-15 .. 40 °C
Flüssigkeitstemperatur während des Betriebs:
20 °C
Dichte:
998.2 kg/m3
Leistungsfrequenz:
50 Hz
Nennspannung:
3 x 380-400-415 V
Nettogewicht:
123 KILOGRAMM
Bruttogewicht:
169 KG
Nennbetrag:
30 m-³ /h
Bewerteter Kopf:
202 m
Maximaler Umgebungsdruck:
Stange 60
Höchstbetriebsdruck:
Stange 60
Hervorheben:

Anti-Sand Borehole Well Pump

,

Stainless Borehole Deep Well Pump

,

High-Pressure Borehole Well Pump

Produkt-Beschreibung
Deep Well Pump
SP 30 - 26 N
Serial Number: 13c01926


Applicable for:


  • Extraction of groundwater for domestic use
  • Pressure boosting for domestic water supply
  • Groundwater extraction
  • Irrigation
  • Water supply for residential communities and buildings


Stainless steel submersible pump. Materials include EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L). Typical applications: groundwater, irrigation, mining, fountains, offshore operations, etc.



SP 30-26 N
It is a submersible deep well pump, suitable for conveying clean water. It can be installed vertically or horizontally. All steel components are made of stainless steel, specifically EN 1.4401 (AISI 316), ensuring high corrosion resistance.

The pump is equipped with a 22kW MS6000 motor, featuring a sand shield, mechanical shaft seal, water-lubricated sliding bearings, and a volume compensation diaphragm. The motor is a hermetically sealed submersible motor, providing good mechanical stability and high efficiency. It is suitable for temperatures up to 40 °C.

The motor is equipped with a Grundfos Tempcon sensor, which enables temperature monitoring through power line carrier communication and the MP204 control panel. The motor is designed for direct online (DOL) starting.


Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 0


Liquid:
Liquid conveyed: Water
Liquid temperature range: -15 .. 40 °C
Maximum fluid temperature at 0.15 m/sec: 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³


Technology:
Pump speed based on pump data: 2900 revolutions per minute
Rated flow: 30 m³/h
Rated head: 202 meters
Motor shaft seal: SIC/SIC FKM
Approvals: CE, EAC, UKCA, SEPRO, MOROCCO
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES


Materials:
Pump: Stainless steel
EN 1.4401
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Motor: Stainless steel
DIN W.-Nr. 1.4539
AISI 904L


Installation:
Maximum ambient pressure: 60 bar
Maximum operating pressure: 60 bar
Maximum permissible outlet pressure: 30 bar
Interface type: Rp
Connection size: 3 inch
Motor diameter: 6 inch
Minimum borehole diameter: 145 mm


Electrical data:
Motor model: MS6000
Motor flange design: Grundfos
Rated power - P2: 22 kW
Power required by the pump (P2): 22 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 49.5-47.5-46.5 A
Starting current: 480-530-560 %
Cos phi - Power factor: 0.86-0.84-0.82
Rated speed: 2850-2870-2880 revolutions per minute
Starting method: Direct start
Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temperature conductor: Yes
Cable length: 5 meters
Cable type: FLAT
Motor number: 78195618
Windings: Enamelled


Others:
Minimum energy efficiency index, MEI ≥: 0.50
Net weight: 123 kg
Gross weight: 169 kg
Transport volume: 0.412 m³

Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 1
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 2
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 3
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 4


Empfohlene Produkte
produits
EINZELHEITEN ZU DEN PRODUKTEN
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump
MOQ: 1
Preis: negotiable
Standardverpackung: Standard-Export-Plywood-Gehäuse oder -karton
Lieferfrist: 5-8 Wochen
Zahlungsmethode: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Lieferkapazität: Spitzensaison: 1-3 Monate, Nebensaison: 1 Monat
Ausführliche Information
Markenname
Grundfos
Modellnummer
SP 30-26 N
Flüssigkeiten, die befördert werden sollen:
Wasser
Temperaturbereich der Flüssigkeit:
-15 .. 40 °C
Flüssigkeitstemperatur während des Betriebs:
20 °C
Dichte:
998.2 kg/m3
Leistungsfrequenz:
50 Hz
Nennspannung:
3 x 380-400-415 V
Nettogewicht:
123 KILOGRAMM
Bruttogewicht:
169 KG
Nennbetrag:
30 m-³ /h
Bewerteter Kopf:
202 m
Maximaler Umgebungsdruck:
Stange 60
Höchstbetriebsdruck:
Stange 60
Min Bestellmenge:
1
Preis:
negotiable
Verpackung Informationen:
Standard-Export-Plywood-Gehäuse oder -karton
Lieferzeit:
5-8 Wochen
Zahlungsbedingungen:
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Versorgungsmaterial-Fähigkeit:
Spitzensaison: 1-3 Monate, Nebensaison: 1 Monat
Hervorheben

Anti-Sand Borehole Well Pump

,

Stainless Borehole Deep Well Pump

,

High-Pressure Borehole Well Pump

Produkt-Beschreibung
Deep Well Pump
SP 30 - 26 N
Serial Number: 13c01926


Applicable for:


  • Extraction of groundwater for domestic use
  • Pressure boosting for domestic water supply
  • Groundwater extraction
  • Irrigation
  • Water supply for residential communities and buildings


Stainless steel submersible pump. Materials include EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L). Typical applications: groundwater, irrigation, mining, fountains, offshore operations, etc.



SP 30-26 N
It is a submersible deep well pump, suitable for conveying clean water. It can be installed vertically or horizontally. All steel components are made of stainless steel, specifically EN 1.4401 (AISI 316), ensuring high corrosion resistance.

The pump is equipped with a 22kW MS6000 motor, featuring a sand shield, mechanical shaft seal, water-lubricated sliding bearings, and a volume compensation diaphragm. The motor is a hermetically sealed submersible motor, providing good mechanical stability and high efficiency. It is suitable for temperatures up to 40 °C.

The motor is equipped with a Grundfos Tempcon sensor, which enables temperature monitoring through power line carrier communication and the MP204 control panel. The motor is designed for direct online (DOL) starting.


Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 0


Liquid:
Liquid conveyed: Water
Liquid temperature range: -15 .. 40 °C
Maximum fluid temperature at 0.15 m/sec: 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³


Technology:
Pump speed based on pump data: 2900 revolutions per minute
Rated flow: 30 m³/h
Rated head: 202 meters
Motor shaft seal: SIC/SIC FKM
Approvals: CE, EAC, UKCA, SEPRO, MOROCCO
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES


Materials:
Pump: Stainless steel
EN 1.4401
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Motor: Stainless steel
DIN W.-Nr. 1.4539
AISI 904L


Installation:
Maximum ambient pressure: 60 bar
Maximum operating pressure: 60 bar
Maximum permissible outlet pressure: 30 bar
Interface type: Rp
Connection size: 3 inch
Motor diameter: 6 inch
Minimum borehole diameter: 145 mm


Electrical data:
Motor model: MS6000
Motor flange design: Grundfos
Rated power - P2: 22 kW
Power required by the pump (P2): 22 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 49.5-47.5-46.5 A
Starting current: 480-530-560 %
Cos phi - Power factor: 0.86-0.84-0.82
Rated speed: 2850-2870-2880 revolutions per minute
Starting method: Direct start
Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temperature conductor: Yes
Cable length: 5 meters
Cable type: FLAT
Motor number: 78195618
Windings: Enamelled


Others:
Minimum energy efficiency index, MEI ≥: 0.50
Net weight: 123 kg
Gross weight: 169 kg
Transport volume: 0.412 m³

Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 1
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 2
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 3
Grundfos Anti-Sand High-Pressure Stainless Steel Submersible Borehole Deep Well Water Pump 4


Sitemap |  Privacy policy | Gute Qualität Chinas Wasserumwälzungspumpe Lieferant. Copyright-© 2025 Tianjin Shiny-Metals Technology Co., Ltd. . Alle Rechte vorbehalten.